Cloud/Hetzner/AA

From Chorke Wiki
Jump to navigation Jump to search

SSH

ssh -i ~/.ssh/cid.chorke.org_ed25519 [email protected]

cat <<'EXE' | sudo bash
free -th && echo && systemd-analyze && echo
df -h    && echo && lsblk && echo
swapon --show
EXE

Add User

# root
passwd

adduser chorke
passwd  chorke

adduser shahed
passwd  shahed

APT Update

cat << EXE | sudo bash
apt-get update;echo
mkdir -p /etc/apt/keyrings
apt list -a --upgradable;apt-get upgrade -y;echo
apt-get install -y apt-transport-https ca-certificates gnupg build-essential snap jq
apt-get clean cache && find /tmp -type f -atime +10 -delete && find /tmp -type s -atime +10 -delete
EXE

Swap Space

echo 'swapon --show'|sudo bash
cat <<'EXE' | sudo bash
swapoff /swap.img
fallocate -l 20G /swap.img
ls -lh /swap.img && mkswap /swap.img
chmod 0600 /swap.img && swapon /swap.img && swapon --show && free -th
EXE

cat << FST | sudo tee -a /etc/fstab >/dev/null
# loop based swap storage » 16GB + 4GB 
/swap.img              none            swap    sw              0       0
FST

free -th
cat /etc/fstab 
echo 'swapon --show'|sudo bash

Utility » Tool

cat << EXE|sudo bash
PLATFORM=\$(uname -s)_\$(dpkg --print-architecture)
YQ_BINARY=\$(echo "yq_\${PLATFORM}"|tr '[:upper:]' '[:lower:]')
wget https://github.com/mikefarah/yq/releases/latest/download/\${YQ_BINARY} -O /usr/bin/yq && chmod +x /usr/bin/yq
EXE

Containerize » LXD

cat << EXE | sudo bash
snap install lxd --channel=6/stable
usermod -aG lxd chorke
usermod -aG lxd shahed
EXE

echo 'id -nG'|sudo -i -u chorke bash
echo 'id -nG'|sudo -i -u shahed bash

cat <<YML | sudo lxd init --preseed
---
config: {}
networks:
- config:
    ipv4.address: 10.20.0.1/24
    ipv4.nat: "true"
    ipv6.address: auto
  description: ""
  name: lxdbr0
  type: ""
  project: default
storage_pools:
- config:
    size: 30GiB
  description: ""
  name: lxd-zfs-pool-aa
  driver: zfs
storage_volumes: []
profiles:
- config: {}
  description: ""
  devices:
    eth0:
      name: eth0
      network: lxdbr0
      type: nic
    root:
      path: /
      pool: lxd-zfs-pool-aa
      type: disk
  name: default
projects: []
cluster: null
YML

sudo ufw enable
sudo iptables -S

cat << EXE | sudo bash
ufw       allow OpenSSH
ufw       allow in  on lxdbr0
ufw route allow in  on lxdbr0
ufw route allow out on lxdbr0
EXE

sudo ufw status numbered
sudo iptables -S

cat << EXE | sudo bash
snap restart  lxd
snap services lxd
EXE

Containerize » Docker

curl -fsSL https://download.docker.com/linux/ubuntu/gpg \
| sudo tee /etc/apt/keyrings/docker.asc >/dev/null

DISTRIBUTION=$(. /etc/os-release && echo "${VERSION_CODENAME}")
cat << SRC | sudo tee /etc/apt/sources.list.d/docker.list >/dev/null
deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.asc] https://download.docker.com/linux/ubuntu ${DISTRIBUTION}  stable
SRC

cat << EXE | sudo bash
apt-get update;echo
apt-cache policy docker-ce
apt list -a --upgradable;apt-get upgrade -y;echo
apt-get install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin
apt-get clean cache && find /tmp -type f,s -atime +10 -delete
EXE

cat << EOF | sudo tee /etc/docker/daemon.json >/dev/null
{
    "bip"  : "10.20.13.1/24",
    "mtu"  : 1500,
    "dns"  : [
        "8.8.8.8",
        "8.8.4.4"
    ],
    "debug": true
}
EOF

cat << EXE | sudo bash
systemctl stop  docker.socket
systemctl stop  docker.service
systemctl start docker.service

usermod -aG docker chorke
usermod -aG docker shahed
EXE

ip a
docker image ls
docker network ls

echo 'id -nG'|sudo -i -u shahed bash
echo 'id -nG'|sudo -i -u chorke bash

docker run --rm alpine cat /etc/hosts
docker run --rm alpine cat /etc/resolv.conf

Cloudflare » VIRT

cat << INI | sudo tee /etc/systemd/system/warp0.service >/dev/null
[Unit]
Description=Cloudflared WARP Routing Virtual Interface
After=network.target
[Service]
Type=oneshot
ExecStart=/usr/sbin/ip link add warp0 type dummy
ExecStartPost=/usr/sbin/ip addr add 10.20.41.1/32 dev warp0
ExecStartPost=/usr/sbin/ip link set warp0 up
ExecStop=/usr/sbin/ip link delete warp0
RemainAfterExit=yes
[Install]
WantedBy=multi-user.target
INI

cat << EXE | sudo bash
systemctl enable  warp0.service
systemctl start   warp0.service
systemctl status  warp0.service
EXE

ip a

Cloudflare » Argo Tunnel

wget -cq https://github.com/cloudflare/cloudflared/releases/latest/download/cloudflared-linux-arm64.deb -P ${HOME}/Downloads
sudo dpkg -i ${HOME}/Downloads/cloudflared-linux-arm64.deb; sudo apt install -f
      rm -rf ${HOME}/Downloads/cloudflared-linux-arm64.deb

cat <<'SYS' | sudo tee -a /etc/sysctl.conf >/dev/null

###################################################################
# Cloudflared Tunnel Private Network Config
# This config added by Chorke Academia, Inc
# ICMP Group ID Range 0 to 10,000 Users
net.ipv4.ping_group_range = 0 10000

# 208 KiB Default RX Buffer
net.core.rmem_default=212992

# 208 KiB Default TX Buffer
net.core.wmem_default=212992

# 8 MB Maximum RX Buffer
net.core.rmem_max=8388608

# 8 MB Maximum TX Buffer
net.core.wmem_max=8388608

SYS

sudo sysctl -p

Skipped » Find More » 👈

Cloudflare » WARP Tunnel

lxc launch ubuntu:24.04 cloudflare
lxc list -c=n -f=json|jq -r '.[]|select(.name=="cloudflare")|.status'

cat <<'EXE' | lxc exec cloudflare -- bash
apt-get update;echo
mkdir -p /etc/apt/keyrings
apt list -a --upgradable;apt-get upgrade -y;echo
apt-get install -y apt-transport-https ca-certificates gnupg jq && apt-get clean
EXE

cat <<'EXE' | lxc exec cloudflare -- bash
curl -fsSL https://pkg.cloudflareclient.com/pubkey.gpg \
 | sudo tee /etc/apt/keyrings/cloudflare.asc >/dev/null

DISTRIBUTION=$(. /etc/os-release && echo "${VERSION_CODENAME}");\
cat << SRC | sudo tee /etc/apt/sources.list.d/cloudflare.list >/dev/null
deb [arch=$(dpkg --print-architecture)\
 signed-by=/etc/apt/keyrings/cloudflare.asc]\
 https://pkg.cloudflareclient.com/ ${DISTRIBUTION} main
SRC

cat /etc/apt/sources.list.d/cloudflare.list
cat /etc/apt/keyrings/cloudflare.asc
EXE

cat <<'EXE' | lxc exec cloudflare -- bash
apt-get update;echo
apt list -a --upgradable;apt-get upgrade -y;echo
apt-get install -y cloudflare-warp && apt-get clean
EXE

lxc exec cloudflare -- bash
sudo vim /etc/sysctl.conf
sudo sysctl -p

cat <<'EXE' | lxc exec cloudflare -- bash
cat << YML  | sudo tee /etc/netplan/50-cloud-init.yaml >/dev/null
network:
  version: 2
  ethernets:
    eth0:
      dhcp4: false
      addresses:
        - 10.20.0.2/32
YML

cat /etc/netplan/50-cloud-init.yaml
reboot
EXE

lxc snapshot cloudflare base:2024.12.554.0
lxc publish  cloudflare/base:2024.12.554.0 --alias cloudflare/base:2024.12.554.0
lxc restore  cloudflare base:2024.12.554.0

Skipped » Find More » 👈

References

Retrieved from "https://cdn.chorke.org/weke/index.php?title=Cloud/Hetzner/AA&oldid=14063"