DigitalOcean Reverse Proxy

Why Reverse Proxy

A reverse proxy is a type of proxy server that takes HTTP(S) requests and transparently distributes them to one or more backend servers. Reverse proxies are useful because many modern web applications process incoming HTTP requests using backend application servers which aren't meant to be accessed by users directly and often only support rudimentary HTTP features. You can use a reverse proxy to prevent these underlying application servers from being directly accessed. They can also be used to distribute the load from incoming requests to several different application servers, increasing performance at scale and providing fail-safeness. They can fill in the gaps with features the application servers don't offer, such as caching, compression, or SSL encryption too.

Prerequisites

1. CentOS 7 Droplet with root/sudo access
2. Apache 2 installed on your CentOS 7
3. Optionally, the nano/vim text editor

yum install httpd
apachectl restart
systemctl status httpd
apachectl -t

Required Modules

The modules that are needed to use Apache as a reverse proxy include mod_proxy itself and several of its add-on modules, which extend its functionality to support different network protocols. Specifically, we will be using:

1. mod_proxy, the main proxy module Apache module for redirecting connections; it allows Apache to act as a gateway to the underlying application servers.
2. mod_proxy_http, which adds support for proxying HTTP connections.
3. mod_proxy_balancer and mod_lbmethod_byrequests, which add load balancing features for multiple backend servers.

The command output will list all enabled Apache modules. The four lines you're looking for are the aforementioned module names:

httpd -M
# console output 
proxy_module (shared)
.... more ....
lbmethod_byrequests_module (shared)
.... more ....
proxy_balancer_module (shared)
proxy_http_module (shared)
.... more ....

In case the modules are not enabled, you can enable them by opening the /etc/httpd/conf.modules.d/00-proxy.conf with vi, vim or nano

Config Reverse Proxy

# /etc/httpd/conf.d/httpd-proxy.conf
<VirtualHost *:80>
    ProxyPreserveHost On
    ProxyRequests Off
    AllowEncodedSlashes Off
    ServerName dev.chorke.org
    ServerAlias uat.chorke.org

    # proxy for amqp
    ProxyPass /amqp http://127.0.0.1:8300/amqp nocanon
    ProxyPassReverse /amqp http://127.0.0.1:8300/amqp

    # proxy for mqtt
    ProxyPass /mqtt http://127.0.0.1:8301/mqtt nocanon
    ProxyPassReverse /mqtt http://127.0.0.1:8301/mqtt

    # proxy for ebis
    ProxyPass /ebis http://127.0.0.1:8302/ebis nocanon
    ProxyPassReverse /ebis http://127.0.0.1:8302/ebis

    # proxy for fhir
    ProxyPass /fhir http://127.0.0.1:8303/fhir nocanon
    ProxyPassReverse /fhir http://127.0.0.1:8303/fhir

    # proxy for init
    ProxyPass /init http://127.0.0.1:8304/init nocanon
    ProxyPassReverse /init http://127.0.0.1:8304/init
</VirtualHost>

Restrict Reverse Proxy

# /etc/httpd/conf.d/httpd-proxy.conf
<VirtualHost *:80>
    ProxyPreserveHost On
    ProxyRequests Off
    AllowEncodedSlashes Off
    ServerName dev.chorke.org
    ServerAlias uat.chorke.org

    <Proxy *>
        Order Deny,Allow
        Deny from all
        Allow from ::1
        Allow from 100.43.0
        Allow from 127.0.0.1
        Allow from 192.168.0
    </Proxy>

    # proxy for ebis
    ProxyPass /ebis http://127.0.0.1:8302/ebis nocanon
    ProxyPassReverse /ebis http://127.0.0.1:8302/ebis

    # proxy for fhir
    ProxyPass /fhir http://127.0.0.1:8303/fhir nocanon
    ProxyPassReverse /fhir http://127.0.0.1:8303/fhir

    # proxy for init
    ProxyPass /init http://127.0.0.1:8304/init nocanon
    ProxyPassReverse /init http://127.0.0.1:8304/init
</VirtualHost>

Restrict Proxy Location

# /etc/httpd/conf.d/httpd-proxy.conf
<VirtualHost *:80>
    ProxyPreserveHost On
    ProxyRequests Off
    AllowEncodedSlashes Off
    ServerName dev.chorke.org
    ServerAlias uat.chorke.org

    # proxy for amqp
    ProxyPass /amqp http://127.0.0.1:8300/amqp nocanon
    ProxyPassReverse /amqp http://127.0.0.1:8300/amqp

    # proxy for mqtt
    ProxyPass /mqtt http://127.0.0.1:8301/mqtt nocanon
    ProxyPassReverse /mqtt http://127.0.0.1:8301/mqtt

    # proxy for ebis
    <Location /ebis>
        Order Deny,Allow
        Deny from all
        Allow from ::1
        Allow from 100.43.0
        Allow from 127.0.0.1
        Allow from 192.168.0
        ProxyPass http://127.0.0.1:8302/ebis nocanon
        ProxyPassReverse http://127.0.0.1:8302/ebis
    </Location>
</VirtualHost>

Check Apache Config

apachectl -t
# apachectl restart
systemctl restart httpd

# grant network connection to apache 
setsebool -P httpd_can_network_connect on

Check Reverse Proxy

All configuration done! Right now need to check either your are able access http://dev.chorke.org/init/ or not, instead of http://dev.chorke.org:8304/init. Then you should prevent direct access to http://dev.chorke.org:8304/init. All of the HTTP Port should be start with 83 and integration port 13.

Proxy Port Convention

#830 port prefix for TCP 8300 for amqp console 8301 for mqtt console 8302 for ebis console 8303 for fhir console 8304 for init console #150 port prefix for TCP 1500 for amqp management 1501 for mqtt management 1502 for ebis management 1503 for fhir management 1504 for init management

#831 port prefix for TLS 8310 for amqp console 8311 for mqtt console 8312 for ebis console 8313 for fhir console 8314 for init console #151 port prefix for TLS 1510 for amqp management 1511 for mqtt management 1512 for ebis management 1513 for fhir management 1514 for init management

#130 port prefix for TCP 1300 for amqp service 1301 for mqtt service 1302 for ebis service 1303 for fhir service 1304 for init service

#131 port prefix for TLS 1310 for amqp service 1311 for mqtt service 1312 for ebis service 1313 for fhir service 1314 for init service

Knowledge

nocanon:
Normally, mod_proxy will canonicalise ProxyPassed URLs. But this may be incompatible with some backends, particularly those that make use of PATH_INFO. The optional nocanon keyword suppresses this and passes the URL path "raw" to the backend. Note that this keyword may affect the security of your backend, as it removes the normal limited protection against URL-based attacks provided by the proxy.

noquery:
Normally, mod_proxy will include the query string when generating the SCRIPT_FILENAME environment variable. The optional noquery keyword (available in httpd 2.4.1 and later) prevents this.

interpolate:
The optional interpolate keyword, in combination with ProxyPassInterpolateEnv, causes the ProxyPass to interpolate environment variables, using the syntax ${VARNAME}. Note that many of the standard CGI-derived environment variables will not exist when this interpolation happens, so you may still have to resort to mod_rewrite for complex rules. Also note that interpolation is supported within the scheme/hostname/port portion of a URL only for variables that are available when the directive is parsed (like Define). Dynamic determination of those fields can be accomplished with mod_rewrite. The following example describes how to use mod_rewrite to dynamically set the scheme to http or https:

References

ProxyPass: Redirect directory URL to non-standard port Configure Nginx as a Web Server and Reverse Proxy Set Up Django with Postgres, Nginx, and Gunicorn Set Up Basic HTTP Authentication With Nginx Configure Nginx to Use Custom Error Pages Apache Load Balancer Reverse Proxy Nginx HTTP Auto Index Module Apache as a Reverse Proxy Nginx Reverse Proxy